E-flite Power 15 Brushless Outrunner Motor, 950Kv Manuel d'utilisateur télécharger pdf

Power 15 Brushless Outrunner Instructions

Thank you for purchasing the E-flite Power 15 Brushless Outrunner motor. The Power 15 is designed to deliver clean and quiet power for

15-size sport and scale airplanes weighing 36- to 56-ounces (1020- to 1590-grams), 3D airplanes 32- to 40-ounces (910- to 1135-gram),

or models requiring up to 425 watts of power.

Power 15 Brushless Outrunner Features:

• Equivalent to a 15-size glow engine for sport and scale airplanes weighing 36- to 56-ounces (1020- to 1590-grams)

• Ideal for size 3D airplanes 32- to 40-ounces (910- to 1135-gram)

• Ideal for models requiring up to 575 watts of power

• High torque, direct drive alternative to inrunner brushless motors

• Includes mount, prop adapters, and mounting hardware

• Quiet, lightweight operation

• External rotor design, 5mm shaft can easily be reversed for alternative motor installations

• High quality construction with ball bearings and hardened steel shaft

• Slotted 14-pole outrunner design

Power 15 Specifications

Diameter: 35mm (1.4 in)

Case Length: 48mm (1.9 in)

Weight: 152g (5.4 oz)

Shaft Diameter: 5mm (.2 in)

EFLM4015A

Kv: 950 (rpms per volt)

Io: 2A @ 10V (no load current)

Ri: .03 ohms (resistance)

Continuous Current: 34A*

Max Burst Current: 42A*

Watts: up to 575

Cells: 8-12 Ni-MH/Ni-Cd or 3-4S Li-Po

Recommended Props: 10x6 to 13x6.5

Brushless ESC: 40-45 Amp

* Maximum Operating Temperature: 220 degrees Fahrenheit

* Adequate cooling is required for all motor operation at maximum current levels.

* Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required for proper cooling and to

avoid overheating the motor.

* Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may result in damage to the

motor since excessive use of burst current may overheat the motor.

Determine a Model’s Power Requirements:

1. Power can be measured in watts. For example: 1 horsepower = 746 watts

2. You determine watts by multiplying ‘volts’ times ‘amps’. Example: 10 volts x 10 amps = 100 watts

Volts x Amps = Watts

3. You can determine the power requirements of a model based on the ‘Input Watts Per Pound’ guidelines found below, using the flying

weight of the model (with battery):

• 50-70 watts per pound; Minimum level of power for decent performance, good for lightly loaded slow flyer and park flyer models

• 70-90 watts per pound; Trainer and slow flying scale models

• 90-110 watts per pound; Sport aerobatic and fast flying scale models

• 110-130 watts per pound; Advanced aerobatic and high-speed models

• 130-150 watts per pound; Lightly loaded 3D models and ducted fans

• 150-200+ watts per pound; Unlimited performance 3D and aerobatic models

NOTE: These guidelines were developed based upon the typical parameters of our E-flite motors. These guidelines may vary depending

on other motors and factors such as efficiency and prop size.

4. Determine the Input Watts Per Pound required to achieve the desired level of performance:

Model: 15-size 3D ARF

Estimated Flying Weight w/Battery: 2.4 lbs

Desired Level of Performance: 150-200+ watts per pound; Unlimited performance 3D and aerobatics

2.4 lbs x 150 watts per pound = 360 Input Watts of total power (minimum)

required to achieve the desired performance

5. Determine a suitable motor based on the model’s power requirements. The tips below can help you determine the power capabilities of

a particular motor and if it can provide the power your model requires for the desired level of performance:

1 2 3 4

Résumé du contenu

Page 1

Power 15 Brushless Outrunner Instructions Thank you for purchasing the E-flite Power 15 Brushless Outrunner motor. The Power 15 is designed to deli

Page 2

• Most manufacturers will rate their motors for a range of cell counts, continuous current and maximum burst current. • In most cases, the input pow

Page 3

Safety Precautions: This is a sophisticated hobby product and not a toy. It must be operated with caution and common sense and requires some basic mec

Page 4

damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the Purchaser or user are not prepared t

Commentaires sur ces manuels

Pas de commentaire

E-flite Power 15 Brushless Outrunner Motor, 950Kv Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel E-flite Power 15 Brushless Outrunner Motor, 950Kv. E-flite Power 15 Brushless Outrunner Motor, 950Kv User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel E-flite Power 15 Brushless Outrunner Motor, 950Kv