E-flite Cap 232 BP ARF Manuel d'utilisateur télécharger pdf (Page 3)

Introduction

The Cap 232 BP 3D combines the sturdy construction of a

balsa/light-ply airframe with the uninhibited 3D capability

of a lightweight profile park flyer. It’s all made possible

by its intelligently engineered, open structure design that

keeps weight to a bare minimum while providing all the

structural integrity of a real wood airframe. This feather-

light construction, combined with a high-output brushless

motor, will provide spine-tingling 3D and freestyle

performance that will let you really push the limits. And it

comes from the factory 90% built and covered in genuine

UltraCote

and UltraCote Light so you can be up and

flying in no time

Specifications

Wingspan: 35.5 in (900mm)

Length: 35.5 in (900mm)

Wing Area: 425 sq in (27.5 sq dm)

Weight w/o Battery: 13–14 oz (370–400 g)

Weight w/ Battery: 15.5–17 oz (440–480 g)

Using the Manual

This manual is divided into sections to help make assembly

easier to understand, and to provide breaks between each

major section. In addition, check boxes have been placed

next to each step to keep track of each step completed.

Steps with a single circle () are performed once, while

steps with two circles ( ) indicate that the step will

require repeating, such as for a right or left wing panel,

two servos, etc.

Remember to take your time and follow the directions.

1 2 3 4 5 6 7 8 ... 43 44

Pas de commentaire

E-flite Cap 232 BP ARF Manuel d'utilisateur Page 3