E-flite 3-Cell LiPo Balancing Charger, 0.8A Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel E-flite 3-Cell LiPo Balancing Charger, 0.8A. E-flite 3-Cell LiPo Balancing Charger, 0.8A User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 6
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
7
Battery Warnings, Guidelines and Charging
While the 11.1V 800mAh 3-cell Lithium Polymer Battery Pack (EFLB0995) included with your Blade™
CP Pro features Charge Protection Circuitry and Balance Charging via the included 3-cell Lithium
Polymer Balance Charger (EFLC3105) to help ensure a safe charge every time, you MUST read the
following safety instructions and warnings before handling, charging or using the Li-Po battery pack.
Note: Lithium Polymer batteries are significantly more volatile than the alkaline, Ni-Cd or
Ni-MH batteries used in RC applications. All instructions and warnings must be followed
exactly. Mishandling of Li-Po batteries can result in fire.
By handling, charging or using the included Li-Po battery you assume all risks associated with lithium
batteries. If you do not agree with these conditions, return your complete Blade CP Pro model in new,
unused condition to the place of purchase immediately.
• You must charge the included 11.1V 800mAh 3-cell Li-Po battery pack in a safe area away from
flammable materials.
• Do not charge the battery when installed in the helicopter.
• Never charge the battery unattended. When charging the battery you should always remain in constant
observation to monitor the charging process and react to potential problems that may occur.
• After flight, the battery must be cooled to ambient temperature before charging.
You MUST use the included 3-cell 11.1V Li-Po Balance Charger ONLY. Failure to do so may result in a
fire causing personal injury and/or property damage. DO NOT use a Ni-Cd or Ni-MH charger.
Vue de la page 0
1 2 3 4 5 6

Résumé du contenu

Page 1

7Battery Warnings, Guidelines and ChargingWhile the 11.1V 800mAh 3-cell Lithium Polymer Battery Pack (EFLB0995) included with your Blade™ CP Pro featu

Page 2

8• If at any time during the charge or discharge process the battery begins to balloon or swell, discontinue charging or discharging immediately. Qui

Page 3

9It is important that you only charge the included 11.1V 800mAh 3-cell Li-Po Battery Pack (EFLB0995) with the included 3-cell 11.1V Li-Po Balance Char

Page 4

10Input power for the charger can also be supplied through the use of an AC to DC adapter/power supply for convenient charging anywhere an AC outlet i

Page 5

11Once you have connected the charger to a power source (Use care to ensure proper polarity when connecting the charger to the power source), its red

Page 6 - Charge Errors and Indications

12Charge Errors and IndicationsIn the event that both the red and green LEDs flash, a charge error has occurred. Some examples of charge errors and th

Commentaires sur ces manuels

Pas de commentaire